Monday, May 13, 2013

Plaited Rag Headband


I always have off-cuts laying around of cute materials. I can't part with them but I can never find a use for them either. Until now.

Make a plaited headband out of scraps. Tear off three strips of fabric equal in length and width. My pieces were approximately 1cm in width and 35cm in length for a child's. Begin by knotting the three strips of material together with at least 5 cm overhanging. Plait as neatly as you can. To make this easier have someone hold the end for you while you plait or place the knotted end under a heavy object such as a chair or table leg. Tie a knot at the end. You will need to make sure that the plait is the right length on the subject. Ideally, it should measure from behind the lower ear and extend over to the other this is how to gage the length. Next you need to attach a length of elastic. I used white lacey elastic to match my fabrics. Attach one end of the fabric to the elastic by sewing it in place on the underside of your fabric plait just above the knot. Then cut two of the overhanging strips of fabric away. Use the remaining fabric to wrap around the knot and where the elastic is attached and hand sew at the back. This covers all the joinery and gives a more see less finish. Next measure the amount of elastic you need to reach around the back of the head with out stretch. This should be a good amount of stretch once you take into account the length lost in overlap. Cut and sew above the knot on the under side of the plait. Then repeat the process of covering the knot and joinery with matching material overhang.

You should now have a nice rustic looking headband and if you've used some of your favourite off cuts, you should be very happy with yourself! These make great gifts and would be great to coordinate with another handmade item in the same material.

No comments:

Post a Comment